How To Build a Purple Martin Bird House with Free Plans

Percy Algernon Taverner , Canadian Ornithologist

PA_Taverner

P.A. Taverner was born Percy Algernon Fowler in Guelph, Ontario in 1875. After his parents separated and his mother remarried, he took on his mother’s second husband’s surname. Taverner, a self-taught naturalist, was the first ornithologist at the National Museum of Canada, now the Canadian Museum of Nature, from 1912 to 1942. He also helped to establish the Point Pelee National Park and a number of bird sanctuaries across Canada, including Bonaventure Island.

He is the original designer and engineer of the now called Taverner Purple Martin House which has been modified in both wood and aluminum to suit today’s housing standards. Have a look at his bio., his original plans and some of the articles and books which he authored. He was well ahead of his time in both his martin observations and suggestions.

His biography:
https://www.pwrc.usgs.gov/bpp/obs_bio_taverner.cfm

In 1919, he wrote an article called “Bird-houses and Their Occupants”, that was printed in the early 1919 edition of a publication called The Ottawa Naturalist.
The article is available for online viewing, via the non-profit openlibrary.org.
Here is the beginning:
https://archive.org/stream/cihm_65426#page/n5/mode/1up

A photo of his house design (complete with Martins flying around)
https://archive.org/stream/cihm_65426#page/n8/mode/1up

The start of the Purple Martin section of the article:
https://archive.org/stream/cihm_65426#page/n10/mode/1up

The original blueprints of his Martin house design:
https://archive.org/stream/cihm_65426#page/n12/mode/1up

Note that vertical raising/lowering of martin housing with window sash weights as well as  easy compartment access,  and House Sparrow and Starling control with a door slide were considered, and addressed, by P.A. Taverner and his design, approximately 50 years before the aluminum house came on the market.

Photo # 4424, 1918: courtesy of the Ottawa Museum of Nature

P. A. Taverner’s second attempt at building a purple martin house for his garden turned out just as his plans were designed. Since he was a fine architect as well as an ornithologist, he seemed to know what was best for the purple martin. His thinking about his design was ahead of its time: a house that can be lowered; a house that could trap invasive species; a house that could be monitored. He was truly a martin house builder ahead of his time!

The Double Taverner is an adaptation of Taverner’s original house but if you would like to download a similar adapted 16 room unit, it is available further below. Your free fancy, vintage 32 compartment wooden martin house plan is available for download here. Have fun building! Don’t forget to send us a picture of your completed house.

 

 Untitled-1

Canadian Double Taverner Purple Martin HouseFREE Electronic book     (32 rooms)

Canadian Double Taverner Insert…FREE Electronic book

 

John_s_Double_Taverner_full_picture

Roof Installed (1)  

P1000323

        installing the door hinges and latches

Here is a successful Double Taverner occupied by Purple Martins.


IMG_3187

Steve took the time to complete the entire house in Sketchup-a CAD program which makes this an extra pattern for download. You must have Google Sketchup installed for it to work.

Scan

Double Taverner Purple Martin House in Sketchup…click here to download the build.

IMG_1620IMG_1621

IMG_1706

Double Taverner completed by Doug, London, Ontario.

Single Taverner Purple Martin House Plan

 

 

The adapted original 16 compartment condo is available for download below. It includes: Starling Resistant Doors, Easy Raising and Lowering with a winch, and adaptable nest trays.

 

New Booklet

Another vintage New Free Plan…give it time to download…..(condo et nichoir de Taverner pour les hirondelles noires )  L’hirondelle noire aime vivre en colonie.

Taverner Under Construction

Roof ridge

Roof Mouldings Being Prepared by Gary

 

Gary used an upper and lower piece for his roof ridge sandwiching the two pieces . Gary mentions that an option he came up with to strengthen and also simplify the alignment of the roof panels at the peak / ridge. I started with 1 3/8″ square pre-cut cedar deck spindles. I ripped them down and will glue the waste wedge (far right) to the inside of the roof peak. Thanks Gary for another great adaptation.

  Gary's single Taverner

photo

Taverner completed  and facing the Mississippi River by Gary Fairbrother. More photos below.

photo2

GetAttachment2

Drill a 3/4″ hole  and cut a PVC Pipe on a 45 degree angle to keep the rain out. Cover the hole on the inside with a screen piece. The house is now vented to increase air circulation.

Gary's styrofoam nest inserts

This is the shape I decided on for artificial nests in my Taverner house. They are ambidextrous so I can stagger them the opposite of the openings and leave more entrance room and rain protection inside. The elevation is good for keeping the nests dry on the lower floors which I’m concerned about. I followed your carving instructions to the letter and like everything else it went great! Because they are not shaped to press fit I’ll stabilize them with little floor cleats or maybe Velcro. Check out John’s website for tips on making these inserts at Useful Products.

BIRD HOUSE 2Single Taverner completed in Wisconsin, USA by Roger Buchholtz.

IMG_2183

Adding Gourds to Balga’s Single Taverner

Adding door closers at end of season

Adding Rain Protection

New Entrance roof

Post Top and Cable Detail Possibilities

Cable is attached to shaft  underneath the house and secured to a clip which is secured to the shaft. 

Cable has been conveniently cut and hidden into decorative wing.

Single Taverner Trim Detail

 

Pole top 2

Pole top 3

 

Trim has been added to post shaft, hiding the cable. Courtesy of Gary Fairbrother. Another photo added by Gary to show the roof angles on the template found on Page 21 of the booklet.

Bird House Pole Construction

There are a number of optional poles available for both Taverner houses which other manufacturers or individuals have created. Check out the following links for more information.

I came across this variation of the Taverner House built in France but could not contact the fabricator…… Here are some pictures of the build: Click on the photos to enlarge them.

Publication1

 

Publication2

 

Publication3

TAVERNER ALUMINUM MARTIN HOUSE 

Al Taverners

Single Taverner

Aluminum Taverner

John's Taverner

Single Taverner Style Photos   

Alberta Taverner Type Wooden Purple Martin Houses

MVC_010S

Blue Taverner

mod mh

Untitled-2

Clyde Brown (Manitoba) Taverner Style

     Manitoba Style Martin House Plan click on link

This is the Manitoba style Purple Martin House from the Movie Heaven is for Real

A well used Manitoba style Taverner showing its age but with all the conveniences of the original Manitoba plan.

Double Taverner from Quebec..

-built by Leo Chartrand,  from St-Eustache 

taverner

 

See  P. A.Taverner Bird Houses and Their Occupants 1950 

Original-Rondeau-Purple-Martin-House

 Original Rondeau Wooden Purple Martin House With Dimensions

$T2eC16J,!zUE9s38-I5FBRbrLmz(Zw~~48_20

Rondeau-House-2

(Condo original pour l’hirondelle noire fait avec Sketchup.)

Modified-Rondeau-Purple-Martin-House

Modified Rondeau Wooden Purple Martin House with Dimensions…….click here.

Isaak

Isaak’s Taverner Purple Martin Wooden Martin House Plan on EBAY

Chucks-T-141

Chuck Abare’s T-14 Style Martin House great house for Northern Climates….Find it on Chuck’s site . 

Original Vintage Purple Martin House designed by Denise Hilton : I Like It Design

 

Taverner-pg1 Taverner-pg2 Bird-Houses-and-their-Occupants-8

Girdwood Taverner

Taverner by Mr. Girdwood. Pembrook, Ontario- 1974